The RS1 M4A

RS1 M4A. D-Box motion kit i4250, Speakers ready, Buttkicker ready, Tablet/Buttonbox ready.

• RS1 M4A "D-BOX" system with 4 actuators.
• D-BOX software is Windows PC compatible only.
• D-BOX KAI-1P USB Controller
• D-BOX ™ motion actuators kit 4250i (4 x Actuators)
• RS1 D-BOX Adaptor Frame made of cnc laser cutted carbon steel to hold the actuators
• RS1 Level 2 included (RS1 simulator + all accessories)
• RS1 M4A comes in 2 color schemes depending the color of the seat and frame.
• Chassis comes in black matte or white matte powder coat paint.
• Power requirement (per ACM 120V) - 120 VAC, 60 Hz, 5 A
• Footprint dimensions: 1625mm x 800mm x 1255mm (64” x 31.5” x 49.40”)
• Weight: 140kg (308lbs)
• Assembly tools and screws provided.
• Static Keyboard / Mouse tray Included
• Tablet / Buttonbox mount Included
• Buttkicker® Mount Included
• Shifter Upgrade kit included
• Available addons: RS STAND T3l, T3Xl (up to 3x47 inch TV's), T3S (up to 1x 65 inch TV)

The D-BOX 4250i System

The ultimate motion experience is delivered by these 4 actuators. Experience the full spectrum of motion in its best rendering: pitch, roll, heave and intelligent vibrations while racing.

• Max Vertical lift - 35 mm.
• Max Vertical Velocity - ±100 mm./sec
• Max Vertical Acceleration - ±1g
• Frequency range - 0 to 100Hz
• Operating Temperature range - 0 to 30°C
• Operating Humidity - 10 up to 75 %
• Maximum lifting capacity (per seating area) - 1000 lb / 455 kg

Video

Short Product video with RS1 M3A in action Click Here
Short Product video with RS1 M3A in action Click Here

Support

PC Only

The Seat

• Seat shell made of composite materials and finished in gloss black.
• Leather comes in 3 color options (White, Black and Red)
• RS1 Allow to recline the entire seat ±4°
• Seat sliders allow to adjust it front-backwards ±90mm (3.54inch)
• Highly wear resistant suitable for game race centers.

Chassis

• Made of Laser cut carbon steel and cnc bended round tubes.
• Comes in two color options (Black matte or White matte powder coat paint).
• Frame step on the ground by 4 adjustable legs (80mm diameter each).
• Total height (with the seat): 1255 mm (49.40”)
• Total width: Rear: 800 mm (31.5”)
• Pedal plate width 350 mm. (13.78”)
• Pedal plate adjust from full flat up to 60°
• Whell mounting plate allow to adjust height of the wheel ±8 cm (3.15”)
• Slide pedals front-backwards ±90mm (3.54inch)
• Footprint dimensions: 1625mm x 800mm x 1255mm (64” x 31.5” x 49.40”)
• Weight: 140kg (308lbs)

Keyboard / Mouse tray

• Made of laser cut carbon steel and round tubes.
• Fully Adjustable in hight, tilt and possition.
• Direct fitment on RS1 Level 1 chassis
• Assembly instructions provided
• Comes in black matte or white matte powder coat paint.
• Keyboard tray dimensions 500 mm. x 205 mm. (19.68” x 8.07”)
• Mouse tray diameter - 200 mm. (7.87”)

Tablet / Buttonbox mount

• Made of laser cut carbon steel and cnc bended round tube.
• Angle and tilt adjustable (both tablet mount and buttonbox mount).
• Assembly instructions provided
• Comes in black matte or white matte powder coat paint.
• Direct fitment on RS1 Level 1 chassis
• Fits most 5″-10.1″ tablets
• including iPad 2, 3, 4, iPad Mini, Samsung's tablests, HP's Touchpad. Acer, Asus, Vizio, Toshiba, Black Berry, Viewsonic’s tablets, etc..
• Buttonbox mount support to hardmount: DSD Track Boss, DSD Black Max, DSD Black Max II Buttonboxes.

Buttkicker® Mount

• Made of Laser cut carbon steel and round tubes.
• Comes in two color options (Black matte or White matte powder coat paint).
• Assembly instructions provided
• Direct fitment on RS1 Level 1 chassis
• Support all Buttkicker models including Buttkicker ™ Gamer 2, Pearl ™ THMP1, ButtKicker ™ Simulation Kit, and more..

Shifter Kit

• Support Fanatec Clubsport Shifter, Thrustmaster HOTAS Warthog joystick and throttle
• Made of Laser cut carbon steel and round tubes.
• Comes in two color options (Black matte or White matte powder coat paint).
• Assembly instructions provided
• Direct fitment on RS1 basic chassis

Speakers Mount

• Made of Laser cut carbon steel.
• Comes in two color options (Black matte or White matte powder coat paint).
• Assembly instructions provided
• Direct fitment on RS1 Level 1 chassis
• Support Logitech® Z906 5.1 sound system. Other Speaker systems with wall mount support can be attached.

Hardware

• All tools and screws to attach your Wheel, pedals and shifter are provided.
• Detailed assembly instructions.

24×7 Support

• We provide 24×7 on site support through ticket or live-chat.
• Distributor network allow to have full support in your area.

Warranty

• 1 year Warranty on all Rseat Manufactured components including chassis and seat.

Delivery

• Free local Delivery within Singapore Island.
• Shipping destination out of Singapore will be charge as per UPS shipping rate.

Write a review